Parts we make

Every family here comes from programs we've already run. Don't see it? Send it anyway; new work is welcome.

Couplers, flanges & adapters

Couplers & drive adaptersDouble-D, square, star and keyed bores to join a valve, actuator or motor to a shaft.Flanges & bolt-circle platesAccurate bolt circles, tapped holes and pilot bores; weld-ready.HubsKeyed or set-screw hubs and weld-on hubs.Valve & nozzle partsValve trim, nozzles, check-valve parts and small housings.

Bushings & sleeves

BushingsPlain and flanged bushings in brass, bronze, steel or plastic.SleevesShaft sleeves and liners, thin-wall or heavy.SpacersRound spacers and standoffs, faced to length.Hex standoffsHex and round standoffs, tapped or with a stud end.

Rollers & pulleys

RollersGuide and idler rollers, bored for bearings or shafts.Pulleys & sheavesV-groove and flat pulleys, sheaves and small wheels.

Pins & shafts

PinsClevis, hitch, grooved and cross-drilled pins.ShaftsStepped shafts with keyways, flats and drilled/tapped ends.Custom shoulder boltsCustom shoulder (stripper) bolts in odd sizes and materials.Dowel pinsLocating and dowel pins ground or turned to size.

Buttons & caps

ButtonsPlastic and metal buttons, bumpers, stops and feet.Caps & plugsThreaded end caps and plugs.

Washers & seats

WashersFlat, thrust and special-size washers and shims.Valve seats & sealsNylon, Delrin and PTFE seats and seal rings.CollarsShaft and stop collars, set-screw or split.

Threaded parts

Nuts & Acme stem nutsAcme stem nuts, jam nuts and special nuts, LH or RH.Studs & threaded rod endsDouble-end studs and threaded rod ends.Threaded end fittings & socketsTurned end fittings and sockets, threaded inside or out, made to your size.Coupling nutsLong hex nuts to join threaded rod, in odd threads and lengths.

Gears & sprockets

GearsLow-volume spur gears, often in Delrin or nylon.Sprockets & star wheelsSprockets and star wheels, including rebores.

Plates, blocks & fixtures

Plates & bracketsDrilled, slotted and counterbored plates and brackets.Blocks & manifoldsBlocks drilled and tapped on several faces.Covers & delete platesBillet covers with bolt patterns, O-ring grooves and your logo.Arms, levers & camsArms, links, levers and cams, often remade from a worn sample.Jigs, fixtures & soft jawsHolding fixtures, nests and soft jaws for your line.

Plastic parts

Pucks, discs & big ringsLarge plastic discs and rings up to about 8.5 in.Plastic wear strips & guidesUHMW, Delrin and nylon wear strips, guides and slides.